With regular extensions, the adhesive starts to cure as soon as it meets the moisture in the air. With UV/LED extensions, you use an adhesive that cures mainly when a lamp of the right wavelength shines on it. That gives you more time to place each lash, and curing happens when you decide, at the press of a pedal.
How it differs from regular extensions
| Regular | UV/LED | |
|---|---|---|
| Curing | by moisture in the air | mainly by the lamp light |
| Time to place the lash | depends on glue speed | until you switch on the lamp |
| Extra equipment | — | lamp, light-blocking patches, protective glasses |
| Prep | foam, cleanser and primer | the same order, with LED-suitable products per the manufacturer |
| Removal | regular remover | a remover that also suits LED adhesive |
Even with UV/LED you need to work within the adhesive manufacturer's temperature and humidity range, so a hygrometer next to your station still matters.
Matching the adhesive and the lamp
The adhesive and the lamp must match in wavelength and power. Vilmy Pro works at 395–405 nm, with adjustable 1–5 W power, an adjustable beam and a foot pedal. Vilmy Mini works at 395–400 nm with 2 W, also with a pedal. Before pairing an adhesive with a lamp, check both sets of instructions for wavelength, exposure time and distance.
Adhesives: black Barbara Flash with a 0.3–0.5 second bond, clear Barbara Cris, and the LED adhesives Rili Solar Crystal and Rili Solar Black.
Eye protection
- The client keeps her eyes closed throughout, and her eyes are protected according to the system manufacturer's instructions.
- For the lower lashes, use patches designed for LED work, such as Katya Vinog BOW or MIA STOP-UV LED.
- The artist works in UV400 protective glasses and never looks straight at the light source.
- UV radiation test cards are used to check equipment as their instructions describe.
What you need to start
- A lamp: Vilmy Pro or Vilmy Mini.
- A UV/LED adhesive that matches the lamp.
- Light-blocking patches and protective glasses.
- Prep: BestLash LED primer, degreaser and cleansing foam, and if needed an LED glue booster, meant for artists trained in LED systems. The general prep order is in our lash prep guide.
- A remover that also suits LED adhesive, such as BestLash LED; how removers differ is explained in our remover guide.
- Training: many manufacturers recommend training before working with an LED system.
Lashes, tweezers and technique stay the same as with regular extensions. All the equipment is in the UV / LED category, with more products on the Vilmy and BestLash brand pages.

