Lash extension glue cures with the moisture in the air. That is why the same bottle behaves differently in a Haifa studio in August and in an air-conditioned room in Beer Sheva. Choosing the adhesive for your room conditions gives better retention and fewer early losses.
Why humidity and temperature matter
Most lash adhesives are based on cyanoacrylate, which hardens on contact with moisture. When humidity is too high, the glue cures too fast: the drop sets on the pad, the bond turns brittle and a white residue may appear. When humidity is too low, it cures slowly: fumes stay in the air longer and the bond is weaker. Heat also speeds curing, and in a warm room the glue thickens in the bottle sooner.
Conditions in Israel vary widely: on the coast, summer humidity often reaches 70% or more; Jerusalem and the Negev are much drier; and air conditioning in summer and heating in winter dry the room. There is no single glue that suits everyone.
Step 1: measure your room
Measure before you choose. A thermo-hygrometer next to your station shows the real conditions, not the weather outside. Check at different times over a few days, with the air conditioning running as it does during work.
Step 2: choose by the range on the bottle
Each manufacturer states the humidity and temperature range in which the glue performs, and its bonding time. Choose a glue whose range puts your room in the middle, not at the edge.
| Adhesive | Humidity | Temperature | Bonding time (s) |
|---|---|---|---|
| Barbara Bubble | 30–70% | 18–27°C | 0.2 |
| Barbara Wow | 30–70% | 18–26°C | 0.3–0.5 |
| Barbara Upgrade | 30–70% | 18–27°C | 0.3–0.5 |
| Lovely Sofia | 30–70% | 18–26°C | 0.5 |
| LASHY Bionix | 30–75% | 18–30°C | — |
| Vilmy Crush | 40–70% | 18–30°C | 0.5 |
| Vilmy Vibe | 40–70% | 18–30°C | 0.5–1 |
| Enigma Rocket | 25–50% | 24–28°C | — |
| Enigma Light Mistral | 25–45% | 23–30°C | — |
| Lovely Focus | 20–70% | 18–24°C | 0.5 |
| Vilmy Hulk | 20–70% | 16–24°C | 0.5 |
| LASHY Matrix | 25–70% | 16–26°C | — |
| Lovely Victoria | 40–70% | 18–24°C | 0.5–1 |
| Rili Master | 40–70% | 18–24°C | 1 |
Figures are taken from the product pages on our site. A dash means the manufacturer does not state a bonding time.
- Humid and warm (coast, summer): adhesives with a wide humidity range starting at 30%, such as Barbara Bubble, Barbara Wow, Barbara Upgrade or Lovely Sofia. In a very warm room, LASHY Bionix, Vilmy Crush or Vilmy Vibe, rated up to 30°C.
- Hot and dry: Enigma Rocket and Enigma Light Mistral are made for low humidity at 23–30°C.
- Dry, air-conditioned room: adhesives that work from 20–25% humidity, such as Lovely Focus, Vilmy Hulk or LASHY Matrix.
- Standard conditions (40–70%, 18–24°C): most adhesives work. Beginners do better with about one second of bonding time, such as Rili Master; experienced artists can use Lovely Victoria.
Step 3: correct the room when needed
- Low humidity: a nebulizer or humidifier raises humidity at the station. A suitable primer or a glue accelerator helps the adhesive cure in time.
- High humidity: the dry mode on your air conditioner, a wide-range adhesive and a small drop that you replace often.
- Heat: keep the glue away from windows and warm devices, and replace the drop every 15–20 minutes.
How to store lash glue
Keep an opened bottle tightly closed in a cool, dry place, for example an adhesive storage box with silica gel. A bottle taken from the fridge should reach room temperature before opening so that no condensation gets in. Shake before each use and clean the nozzle. Once opened, glue usually keeps its properties for one to two months; follow the manufacturer's instructions.
In short
Measure the room, pick an adhesive whose range puts your conditions in the middle, and correct the humidity when it falls outside. All adhesives are in lash extension adhesives, with delivery across Israel or pickup in Haifa.

