Extension thickness is measured in millimetres: 0.05, 0.07, 0.10, 0.15. The difference looks small, but it decides the weight the natural lash carries, and with it the lash's health and how long the set lasts.
Why thickness matters so much
A lash's weight grows with its cross-section, that is, with the square of its thickness. A 0.15 lash is about 2.25 times heavier than a 0.10 lash of the same length, and a 0.07 lash weighs about half as much as a 0.10. Length adds weight too: the longer the lash, the heavier it is. When the load is too much, the natural lash weakens and may shed early.
Which thickness for which technique
| Thickness | Technique | Notes |
|---|---|---|
| 0.05 | 4D–6D volume and dense fans | fine and soft; multi-lash fans on healthy natural lashes |
| 0.07 | 2D–3D volume, light classic | the usual volume choice; classic on fine lashes |
| 0.085 | classic on fine lashes, 2D | fuller than 0.07, lighter than 0.10 |
| 0.10 | classic | the standard for classic on average natural lashes |
| 0.12 | bold classic | only on strong, thick natural lashes |
| 0.15 | dramatic classic | very strong lashes, at moderate length |
Load table for comparison
How much weight one natural lash carries compared with one 0.10 classic lash (same length, not counting the adhesive or the fan base):
| What is applied | Relative load |
|---|---|
| Classic lash 0.10 | 1× |
| Classic lash 0.12 | 1.44× |
| Classic lash 0.15 | 2.25× |
| 2D fan 0.07 | 0.98× |
| 3D fan 0.07 | 1.47× |
| 4D fan 0.07 | 1.96× |
| 4D fan 0.05 | 1× |
| 6D fan 0.05 | 1.5× |
A simple rule follows: a 2D fan of 0.07 lashes weighs about the same as one 0.10 classic lash. Dense fans need finer lashes, and a weak natural lash gets fewer lashes per fan or a finer thickness.
Choosing by the natural lashes
- Fine, short or weak: 0.07 classic, or 2D in 0.05–0.07, at moderate length.
- Average: 0.10 classic, 2D–3D in 0.07.
- Strong and thick: 0.12–0.15 classic, or dense volume in 0.05.
If a client wants a full look but has fine lashes, add volume with fine fans rather than raising the classic thickness.
ENVI thicknesses
ENVI black lashes, 16 rows, come in 0.07, 0.085, 0.10, 0.12 and 0.15, and MIX trays also in 0.05. For fast volume there are 3D and 4D premade fans in 0.07 and 10D fans in 0.05. Once you have picked a thickness, read how to choose a curl. All models are in ENVI lashes.

